Make sure that you have a current BIN file loaded.
1. Press the menu key on your remote
2. Go to "[$]" and press the "OK" button
3. Go down to SoftCam, and press the "OK" button
4. Set the Menu screen to look like this:
CAS : NAGRA
Provider name: Dish-Net
Provider ID should be on 00 02
5. Go down to "00" set Keycodes and press the "OK" button A softcam key edit window will open.
6. The first half of the first key "00" will be highlighted, press the "OK" button
7. A Key Pad Window will open, just scroll around to enter your new keys
(Using Up, Down, Left and Right keys)
8. Press OK on the Keypad window, then when window closes press update (green
button on remote)
9. Wait for keycode to update. (if you don't you will have to do it all over again)
10. Now go down and repeat steps for the next half of your new keycode you are
changing.
11. Go down to the "01" or second set of Keys for Dish-Net and do steps 6-10 for 01.
12. Once you've finished the DN Keys you can go to the BellExpressVu keys
13. Go up to the Provider Name
14. Go to the right one time to Bell-Vu.
15. Now repeat the steps above to change your BEV keys.
Be sure to press the "green" button to update your keys and wait after entering your new keys!
If you mess up and need to start over, you can go back to default the keys, by pressing the
Blue default button on your remote.
Hiển thị các bài đăng có nhãn FTA Receivers. Hiển thị tất cả bài đăng
Hiển thị các bài đăng có nhãn FTA Receivers. Hiển thị tất cả bài đăng
Enter Keys Manually in DVB/PCI Boards FTA Receiver
Get the latest file for the new softcam for DVB/PCI boards.
Extract to folder,and drag and drop
Extract to folder,and drag and drop
Enter Keys Manually in Dreambox 500 FTA Receiver
1. Open up Dreambox Control Center, select FTP.
2. Then on left hand side of display double click on var.
3. Then double click on keys, then right click on keylist, and select Edit.
4. Go to the lines which looks like this:
N 0101 01 BXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ; Key update: 1409-
2005
N 0001 01 BXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ; Key update: 1409-
2005
where BXXXXXXXXXXXXXXXXXXXXXXXXXXX is the old key number, and
change it to look like this:
N 0101 00 FXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ; Key update: 07-112005
N 0001 01 FXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ; Key update: 07-112005
where FXXXXXXXXXXXXXXXXXXXXXXXXXXXX is the new key number.
Note that the first line also changes from N 0101 01 to N0101 00
5. Then select File, then select Save and Exit.
6. Then exit out of DCC.
Some people say you have to reboot, but within five seconds after I made this change, I had video and audio back.
2. Then on left hand side of display double click on var.
3. Then double click on keys, then right click on keylist, and select Edit.
4. Go to the lines which looks like this:
N 0101 01 BXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ; Key update: 1409-
2005
N 0001 01 BXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ; Key update: 1409-
2005
where BXXXXXXXXXXXXXXXXXXXXXXXXXXX is the old key number, and
change it to look like this:
N 0101 00 FXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ; Key update: 07-112005
N 0001 01 FXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ; Key update: 07-112005
where FXXXXXXXXXXXXXXXXXXXXXXXXXXXX is the new key number.
Note that the first line also changes from N 0101 01 to N0101 00
5. Then select File, then select Save and Exit.
6. Then exit out of DCC.
Some people say you have to reboot, but within five seconds after I made this change, I had video and audio back.
Enter Keys Manually in Digiwave FTA Receiver
1. Press MENU
2. Scroll down to System Setting.
3. Press OK. If you see a red dot in the botton/left of your screen, go to step 5
4. Enter number 1004. A red dot will come out at your bottom left. YOU DO NOT NEED TO DO
THIS STEP w/ latest bins.
5. Press red button (audio).
6. Press right arrow until NAGRA appears in the first line.
7. Down arrow up to Provider and right arrow up to 0001.
8. Now scroll down to first key line and press OK. scroll to the letters and number and enter Key
00.
9. Scroll down to second key line, press ok. and enter key 01
10. Scroll To Save Key and
11. Press OK.
12. Exit and Enjoy
2. Scroll down to System Setting.
3. Press OK. If you see a red dot in the botton/left of your screen, go to step 5
4. Enter number 1004. A red dot will come out at your bottom left. YOU DO NOT NEED TO DO
THIS STEP w/ latest bins.
5. Press red button (audio).
6. Press right arrow until NAGRA appears in the first line.
7. Down arrow up to Provider and right arrow up to 0001.
8. Now scroll down to first key line and press OK. scroll to the letters and number and enter Key
00.
9. Scroll down to second key line, press ok. and enter key 01
10. Scroll To Save Key and
11. Press OK.
12. Exit and Enjoy
How to enter Keys Manually in Coolsats FTA Receiver
1. Either Enter 8282 on your remote, or you can ht the “Mute” button on your remote and then hit the “Exit” button.
2. Then Making sure that you have the very top box says 1 Nagravision for Dish Net, or 2 Nagravision for BEV .
3. To enter your keys, you can use the numbers on the number pad, and the info button to change letters. Hit the Info button until you get the letter you want, then hit the Right Arrow to change slots.
4. Or, you can hit the OK button and a new menu will pop up. Just use your arrows to select the numbers and letters you want and hit the OK button after each one. (Hit the exit button one time to get out of the little pop up screen.)
5. Now scroll down to the data in line 10. Enter the first half of KEY 86 (or Key 00)
in this line.
6. The go to line 11 and enter the second half of Key 86 (or Key 00) in this line.
7. Then go to line 20 and enter the first half of Key 96 (or Key 01) in this line.
8. Next go to line 21 and enter the second half of Key 96 (or Key 01) in this line.
9. Now hit the Exit button.
10. When the next screen pops up asking if you want to save changes, Use your
arrows and select “Yes” and hit the “OK” button.
11. Now, change your channel, and watch TV.
2. Then Making sure that you have the very top box says 1 Nagravision for Dish Net, or 2 Nagravision for BEV .
3. To enter your keys, you can use the numbers on the number pad, and the info button to change letters. Hit the Info button until you get the letter you want, then hit the Right Arrow to change slots.
4. Or, you can hit the OK button and a new menu will pop up. Just use your arrows to select the numbers and letters you want and hit the OK button after each one. (Hit the exit button one time to get out of the little pop up screen.)
5. Now scroll down to the data in line 10. Enter the first half of KEY 86 (or Key 00)
in this line.
6. The go to line 11 and enter the second half of Key 86 (or Key 00) in this line.
7. Then go to line 20 and enter the first half of Key 96 (or Key 01) in this line.
8. Next go to line 21 and enter the second half of Key 96 (or Key 01) in this line.
9. Now hit the Exit button.
10. When the next screen pops up asking if you want to save changes, Use your
arrows and select “Yes” and hit the “OK” button.
11. Now, change your channel, and watch TV.
How to enter Keys Manually in Conaxsat CNX V1 FTA Receiver
1. Hit the “Menu” button and Press “9999.”
2. Then, go to Key Manager and hit “OK.”
3. Next, go to System,and hit “OK.”
4. Then, to Provider, and hit “OK.”
5. Next, to Key Index, and Hit “OK.”
6. Then, go down to the appropriate field and hit “OK.”
7. Use your Arrow Buttons on the Remote to navigate and enter codes.
Once at stage 6 above... You can also use direct key entry. Here is how:
Use the numeric keypad and if you need to toggle between Alpha and Numeric
entries, each time you need the change, just press the Red RCU button. It's much
faster than arrowing around... once you get the hang of it.
Alphabetic Numbers:
1 =A
2 =B
3 =C
4 =D
5 =E
6 =F
2. Then, go to Key Manager and hit “OK.”
3. Next, go to System,and hit “OK.”
4. Then, to Provider, and hit “OK.”
5. Next, to Key Index, and Hit “OK.”
6. Then, go down to the appropriate field and hit “OK.”
7. Use your Arrow Buttons on the Remote to navigate and enter codes.
Once at stage 6 above... You can also use direct key entry. Here is how:
Use the numeric keypad and if you need to toggle between Alpha and Numeric
entries, each time you need the change, just press the Red RCU button. It's much
faster than arrowing around... once you get the hang of it.
Alphabetic Numbers:
1 =A
2 =B
3 =C
4 =D
5 =E
6 =F
Enter Keys Manually in DishNetwork FTA Receiver
Go down to 00 01 01 section 80 is Key 00, or 86.
Press Green Button. Enter Key 00/86 there.
Go down to 00 01 01 section 90 is Key 01, or 96.
Press Green Button. Enter Key 01/96 there.
Now, be sure to save any changes that you need to.
Exit out and watch TV.
Press Green Button. Enter Key 00/86 there.
Go down to 00 01 01 section 90 is Key 01, or 96.
Press Green Button. Enter Key 01/96 there.
Now, be sure to save any changes that you need to.
Exit out and watch TV.
Enter Keys Manually in BEV FTA Receiver
Go down to 00 09 01 section 80 is Key 00, or Key 86.
Press Green Button. Enter new Key 00/86 there.
Go down to 00 09 01 section 90 is Key 01, or Key 96.
Press Green Button. Enter new Key 01/96 there.
Press Green Button. Enter new Key 00/86 there.
Go down to 00 09 01 section 90 is Key 01, or Key 96.
Press Green Button. Enter new Key 01/96 there.
Enter Keys Manually in CaptiveWorks CW600s FTA Receiver
Part A: Switch off autoroll.
1. Go to Menu.
2. Go To System Setting.
3. Go To OSD.
4. Go down to Autoroll option and switch it to OFF.
5. Exit out to Menu
Part B: Entering Keys Manually
1. Go to Menu.
2. Go To Accessories.
3. Go down to Key Menu.
4. Press Left Arrow Once to show "NAGRA2" on top of screen.
1. Go to Menu.
2. Go To System Setting.
3. Go To OSD.
4. Go down to Autoroll option and switch it to OFF.
5. Exit out to Menu
Part B: Entering Keys Manually
1. Go to Menu.
2. Go To Accessories.
3. Go down to Key Menu.
4. Press Left Arrow Once to show "NAGRA2" on top of screen.
How to enter Keys Manually in Buzz FTA Receiver
1. Hit the “Menu” button.
2. Then scroll down to “Entertainment” and hit the “OK” button.
3. Then scroll down and highlight “Sokoban” then press 7890.
4. You should then see “Code” appear and be flashing. Highlight it and Press “OK.”
5. Then scroll down to Nagravision .
6. Move to Dish and make sure it is 0101 for dish and for BEV 0901.
7. Enter the first half of Key 86 (Key 00) in line 10.
8. Then enter the second half of Key 86 (Key 01) in line 11.
9. Then Enter the first half of Key 96 (Key 01) in line 20.
10. Then Enter the second half of Key 96 (Key 01) in line 21.
11. Then Exit out.
12. Change channel and watch TV
2. Then scroll down to “Entertainment” and hit the “OK” button.
3. Then scroll down and highlight “Sokoban” then press 7890.
4. You should then see “Code” appear and be flashing. Highlight it and Press “OK.”
5. Then scroll down to Nagravision .
6. Move to Dish and make sure it is 0101 for dish and for BEV 0901.
7. Enter the first half of Key 86 (Key 00) in line 10.
8. Then enter the second half of Key 86 (Key 01) in line 11.
9. Then Enter the first half of Key 96 (Key 01) in line 20.
10. Then Enter the second half of Key 96 (Key 01) in line 21.
11. Then Exit out.
12. Change channel and watch TV
Enter Keys Manually in Ariza Extreme FTA Receiver
1. Press “Menu” on remote
2. Press right arrow to “Expert” with remote.
3. Press “1-2-3-4” quickly on remote. This will bring you into the “CAS system”
Menu. This is where you enter/alter data for all services you wish to test.
4. using the arrow keys to navagate , move to the appropriate index for the desired provider, then to the key & select “ok” on remote.
5. Using the arrow keys on remote to change selected values for the desired provider/key.
6. Using your remote, select and change the “key 00 data” with new correct information, then press “exit” on remote to store your changes.
7. Using your remote, select and change the “key 01 data” using the same method described for changing key 00 ,steps 4 -6 substituting the key 01 index/key line and correct data for key 01. Enter the new 01 data, then select “exit” on the remote to store your changes.
8. Press “exit” on remote untill you reach view mode, then wait approx 15 seconds and your reciever should beging to process correctly again, allowing you to view video again until the next change. You must then obtain current/new data and repeat this process over again substituting the new updated data.
9. If after completing all listed steps you still fail to recieve video , then review all
data as entered as well as all setup and installation settings ensuring they are
correct and you are recieving signal from the correct satellites.
2. Press right arrow to “Expert” with remote.
3. Press “1-2-3-4” quickly on remote. This will bring you into the “CAS system”
Menu. This is where you enter/alter data for all services you wish to test.
4. using the arrow keys to navagate , move to the appropriate index for the desired provider, then to the key & select “ok” on remote.
5. Using the arrow keys on remote to change selected values for the desired provider/key.
6. Using your remote, select and change the “key 00 data” with new correct information, then press “exit” on remote to store your changes.
7. Using your remote, select and change the “key 01 data” using the same method described for changing key 00 ,steps 4 -6 substituting the key 01 index/key line and correct data for key 01. Enter the new 01 data, then select “exit” on the remote to store your changes.
8. Press “exit” on remote untill you reach view mode, then wait approx 15 seconds and your reciever should beging to process correctly again, allowing you to view video again until the next change. You must then obtain current/new data and repeat this process over again substituting the new updated data.
9. If after completing all listed steps you still fail to recieve video , then review all
data as entered as well as all setup and installation settings ensuring they are
correct and you are recieving signal from the correct satellites.
Enter Keys Manually in Ariza 700 FTA Receiver
1. Press Menu
2. Scroll Down to Parental Control, Press Enter
3. Press "i" key on remote, then enter pin number "2004"
4. Scroll down to Set Default Key, Press Enter
5. Scroll up to Nagravision , Press Enter
6. Press VOL Right twice, you will see DISH Network
7. Press CH Down once, then VOL Right Twice, you will now see Nagravision 2
displayed top left You are now at the key 00, Press CH Down once so you can edit the Key Data
8. Enter your new keys (write down the old ones to be safe)
9. Press Ok to store, then repeat with key 01
10. Press exit until you get back to tv, all channels will be available
2. Scroll Down to Parental Control, Press Enter
3. Press "i" key on remote, then enter pin number "2004"
4. Scroll down to Set Default Key, Press Enter
5. Scroll up to Nagravision , Press Enter
6. Press VOL Right twice, you will see DISH Network
7. Press CH Down once, then VOL Right Twice, you will now see Nagravision 2
displayed top left You are now at the key 00, Press CH Down once so you can edit the Key Data
8. Enter your new keys (write down the old ones to be safe)
9. Press Ok to store, then repeat with key 01
10. Press exit until you get back to tv, all channels will be available
How to enter Keys Manually in Ariza FTA Receiver
You must do nine steps to enter keys manually in Ariza Receiver
1. Press Green button
2. Press Red button
3. Press Red button
4. Press Menu button
5. Press right arrow several times until you see Nagravision .
6. Now depending on the key that changed and is active you must scroll down til
proper key to be changed.
Example: On 06/09/05 ecm key 01 is active. Scroll down to provider 000101 key
line 01 and enter xx xx xx xx xx xx xx xx (enter number with your # button in your
remote and for letter follow code definition button on your TV screen)
7. Press OK for 5 seconds.
8. Exit, exit ...........
9. Change channel and watch TV.
1. Press Green button
2. Press Red button
3. Press Red button
4. Press Menu button
5. Press right arrow several times until you see Nagravision .
6. Now depending on the key that changed and is active you must scroll down til
proper key to be changed.
Example: On 06/09/05 ecm key 01 is active. Scroll down to provider 000101 key
line 01 and enter xx xx xx xx xx xx xx xx (enter number with your # button in your
remote and for letter follow code definition button on your TV screen)
7. Press OK for 5 seconds.
8. Exit, exit ...........
9. Change channel and watch TV.
How to fix your dead ViewSat
The fixing consists of replacing the tsop.
Im sure some of you already know about this fix, but im also sure alot of other have no idea. This is the same fix VS company is going to do for you. Just buy your own tsop and do it your self. Or have someone else do it for you for alot less.
If you have no skills on soldering, I wont recommend you doing it yourself. You can mess up the board while doing this.
You need a blower "and its not for your hair" you need it for removing the tsop You also need a magnifying glass and very very fine soldering tip. The blower its not a regular blower. For example I have a atten 850A. Maybe you can find something cheaper simular to the one I have. Specially if all you are going to do is one box. In my case I need it something a little more professional because I do this all the time.
The tsop is the 48pin chip sst 39vf1601 next to the cpu and on the Ultra is a 39vf3201.
Now you get the blower and set it to 280 degrees, no higher because you can damage the Board and the tsop. Now you get your self a pair of tweezer to help you remove the chip once its hot enough. Once you have the Tsop removed, you need to remove the extra rosin left on the board. With very very fine soldering TIP. Once you have the board clean of the xtra rosin solder you are ready to put in the new tsop.
To solder the chip you need to aling all 48 pins before you start to solder. Now you are going to solder on one side only and only 2 or 3 pins. Because like that you can go back to the other side of the chip and aling another 2 or 3 pins so you can get a straight fit. Once you have 2 pins on one corner and 2 across on the opposite coner, you are ready to start soldering your new tsop. With a very fine tip you are going to touch all the pins one by one very very carefully so they dont get stuck together in the middel. This is the part thats a pain in the ass. You need very steady hands for this part of the job, you also need a magnifying glass for this.
I hope this can help you guys, If you need any other info or where to get your new and programmed tsop you can PM me. If you think you cant do this you can also PM for repairs cost.
Belive me I have fixed hundreds of dead units here in Miami for dealers and this is what they need done.
Also units that are stock on "- - - -" and you cant fix it no matter what you do. They also need the tsop replaced.
There is a chinese program that can fix some of the units stuck on the 4 dash but it won't fix all of them.
Do this at your own risk!
If you are not sure you can do it, get some one that knows to do it for you.
Source: freeairftaforum.com
Im sure some of you already know about this fix, but im also sure alot of other have no idea. This is the same fix VS company is going to do for you. Just buy your own tsop and do it your self. Or have someone else do it for you for alot less.
If you have no skills on soldering, I wont recommend you doing it yourself. You can mess up the board while doing this.
You need a blower "and its not for your hair" you need it for removing the tsop You also need a magnifying glass and very very fine soldering tip. The blower its not a regular blower. For example I have a atten 850A. Maybe you can find something cheaper simular to the one I have. Specially if all you are going to do is one box. In my case I need it something a little more professional because I do this all the time.
The tsop is the 48pin chip sst 39vf1601 next to the cpu and on the Ultra is a 39vf3201.
Now you get the blower and set it to 280 degrees, no higher because you can damage the Board and the tsop. Now you get your self a pair of tweezer to help you remove the chip once its hot enough. Once you have the Tsop removed, you need to remove the extra rosin left on the board. With very very fine soldering TIP. Once you have the board clean of the xtra rosin solder you are ready to put in the new tsop.
To solder the chip you need to aling all 48 pins before you start to solder. Now you are going to solder on one side only and only 2 or 3 pins. Because like that you can go back to the other side of the chip and aling another 2 or 3 pins so you can get a straight fit. Once you have 2 pins on one corner and 2 across on the opposite coner, you are ready to start soldering your new tsop. With a very fine tip you are going to touch all the pins one by one very very carefully so they dont get stuck together in the middel. This is the part thats a pain in the ass. You need very steady hands for this part of the job, you also need a magnifying glass for this.
I hope this can help you guys, If you need any other info or where to get your new and programmed tsop you can PM me. If you think you cant do this you can also PM for repairs cost.
Belive me I have fixed hundreds of dead units here in Miami for dealers and this is what they need done.
Also units that are stock on "- - - -" and you cant fix it no matter what you do. They also need the tsop replaced.
There is a chinese program that can fix some of the units stuck on the 4 dash but it won't fix all of them.
Do this at your own risk!
If you are not sure you can do it, get some one that knows to do it for you.
Source: freeairftaforum.com
Viewsat Pro - VS-PRO PVR
The VIEWSAT VSPRO was initially designed to be a dual tuner PVR so the GUI was created for TRUE PVR functionality. In order to make this unit more affordable, Viewsat redesigned it to have a single tuner with the option of adding an external Hard Drive through either of two USB ports. The VSPRO uses the fastest processor ever in the FTA market, a blazing260MHz ST! With 32 Mb SDRAM, a beautiful new GUI, 2 USB ports (front and rear), this STB is sure to be Viewsats new best seller. Free Switch and Cable.Source: http://www.dssboxes.com/viewsatpro.html
Viewsat Receivers
V.2 with Fan
The brand new Viewsat 9000 HD High definition with fan and DVR (digital video recorder) has a 266mhz RISC cpu ST40 that will allow you to capture MPEG2-MPEG4 High Def 1080 channels with the best picture provided by the viewsat 9000hd video tuner that is better then coolsat 8000hd video tuner able to give you the best picture and sound on all hd channels. Viewsat 9000hd has a usb port for PVR features along with being able to update by bin files and key codes. This is a great free to air high definition receiver.
* Enable to decode QPSK satellite and ATSC terrestrial transmissions.
* Mpeg2 and Mpeg4
* HDTV, SDTV display support.
* Teletext close caption.
* Video : HDMI, S-Video, Ypbpr, Composite
* Audio : AC3, SPDIF (Optical)
* Aspect ratio adjustment 4:3 (16/9 crop), 4:3 (16/9 letterbox), 16:9 (4/3 pillar box).
* Output format 1080i, 720P, 576P and 576i. (Europe@50hz)
* User friendly OSD and operation.
* Favorite channel selections.
* S/W upgrade through RS-232 and USB 2.0
* Parental Guide and rating control.
* Picture in Picture support�.(Aux input/optional)
* Electronic Program Guide.
* DiSEqC 1.0 & or DiSEqC 1.2
* USB 2.0 port
* Free Switch and Cable
* Free USB Flash Drive and HDMI Cable
Source: http://www.dssboxes.com/viewsathd.html
Đăng ký:
Bài đăng (Atom)